• 201013_MPT160

MPT260 Melt Pressure Tranducers/Transmitters with Rigid Stem

  • Description
  • Key Specifications
  • Send Inquiry
  • Documentation

Product Description

Model MPT260 melt pressure transducer or transmitter (MPT) is designed to measure pressures of melt medium of high temperatures (up to 400 °C). Employing metal foil strain gauge (MfSG) from BCM SENSOR as its sensing element, the MPT260 sensor has its wetted parts and housing made from stainless steel (SS) in order to comply with the requirements of pressure medium of high temperatures and harsh working environment. As a result, the MPT-series sensors find their applications on injection moulding machines and extruders to monitor or measure medium pressures.

Model MPT260 is a basic version in the MPT-series sensors, which consists of an SS isolation diaphragm, an SS rigid stem and an SS electronics housing with electrical interface.

The SS isolation diaphragm is located at the front end of the rigid stem and will be directly approached by melt pressure medium in applications. To avoid mechanical scratches, a specially designed alloy-coating is applied on the isolation diaphragm. Inside the rigid stem, there is a capillary filled with nontoxic liquid-metal alloy which is not mercury and is able to genuinely transfers the medium pressure from the isolation diaphragm to an SS pressure diaphragm. The SS pressure diaphragm is located at the rear end of its rigid stem. On the backside of this pressure diaphragm there is a full bridge MfSG to convert deformation of the pressure diaphragm, which is induced by the measured pressure, into an electrical signal in millivolt.

To meet different requirements in applications, the MPT-series sensors can offer various types of output signal. The standard output signal can be either 3.33mV/V (i.e., the MPT260 without sensor signal conditioner (SSC)), or 4~20mA, 0~5V or 0~10V (i.e., the MPT260 integrated with SSC). By integrated with other kind of SSC, different output signals can be available, such as 4~20 mA with HART protocol, CAN-bus or modbus protocol.

For control purpose, a relay can also be integrated into the MPT-series sensors on request.

To facilitate the calibration on site, the MTP260 sensors are provided with internal 80%fs shunt calibration function. By means of this function the MPT sensors can be calibrated any time without calibrating pressures.

Additional Information

Pressure Range

0~17bar, …, ~2000bar

Combined Error

up to ±0.25%fs

Max. Temperature At Wetted Parts