330B,1

  • 330B,1
  • 330B,3

330B Mono-Block Stainless Steel Pressure Sensors

Category:
  • Description
  • Key Specifications
  • Send Inquiry
  • Documentation

Product Description

The 330B mono-block pressure sensors are made from 304 stainless steel via BCM thick-film technology. Thanks to the mono-block structure, there is no O-ring needed as seal inside the sensor body and no leakage can happen at the back of the sensor.

By means of thick film technology, the resistor network including the Wheatstone bridge circuit and the compensation circuit is directly printed at the back of the 304 stainless steel pressure diaphragm. The other side of the diaphragm is exposed to measured media without any additional protection.

For specific request, the sensor can be equipped with signal conditioning circuit to have amplified output signal.

Additional Information

Pressure Range

0~260bar

Pressure Type

gauge

Output Signal

≥ 2.5mV/V
10%~90%Vs ratiometric (e.g., 0.5~4.5V at Vs = 5Vdc), 0~5V, I2C, SPI, CAN open

Accuracy

up to ±0.5%fs