Author Archives: maria.felgeirolles

101B(a19F) Flush-Diaphragm Pressure Sensor

For applications where customers need to measure pressure of viscous media or media with particles, and especially applications that involve cleaning process, we have developed a complete flush diaphragm sensor 101B(a19F) based on BCM standard pressure sensor model 101B(a19G). This new sensor model has a structure that doesn’t deposit residuals of pressure media. Typical applications: • Process control systems • Industrial controls • Hydraulic and pneumatic controls • Pressure transducers and transmitters • Pressure calibrators Key specifications: • Complete flush diaphragm • Pressure reference & ranges: Gauge: -1, 0.1, Read More...

European Utility Week (Amsterdam, The Netherlands, 3-5 Oct 2017)

BCM SENSOR will participate in European Utility Week (Amsterdam, The Netherlands, 3-5 Oct 2017) Since 1996 we are a supplier of high quality sensors in Europe and worldwide. This year we will exhibit the following sensors for the smart gas metering applications: • Thermal gas flow sensors: Model TFS2200 and TFS2000 • Pressure Transducers: Model 110S • Pressure Sensors: Model 301B • NTC Thermistors BCM SENSOR team is looking forward to your visit at our stand 1H88. Book your free entry ticket via the following link: Read More...

Enova trade fair (Paris, France, 19~21 September 2017)

BCM SENSOR will participate at Enova trade fair in Paris, France on 19 - 21 September 2017. Please visit our stand in hall 4 booth Nr. B7. We will present: • our standard best-selling products - strain gauges, load cells and force transducers; • newly developed Wireless Sensor Network (WSN) for the wireless tie-down strap system used on trucks to measure the force and to signal the load situation; • and NTC-Thermistors. Please download your free entry ticket by the following link: http://enovaparis2017.site.exhibis.net/en/visiteur/identification.htm We are looking Read More...

KC-series Diaphragm Strain Gauges for Compressive- and/or Tensile-Force Transducers

BCM KC-series diaphragm strain gauges developed for Compressive- and/or Tensile-Force Transducers are now available with revised ordering code to facilitate the selection of the right strain gauge parameters for specific applications. One of the typical applications of KC-series diaphragm strain gauges is to produce button-shape load cells for compressive force measurement as shown on the picture. By the following links you will find the datasheets of above-mentioned products: KC-series strain gauges: https://www.bcmsensor.com/products/metal-foil-strain-gauges-for-transducer-application/diaphragm-strain-gauges-2/ 1191 load cells: https://www.bcmsensor.com/products/compression-tension-load-cells/1191-miniature-compression-load-cells/ For more details, please contact us at sales@bcmsensor.com or Read More...

OEM Load Pins from BCM SENSOR

BCM SENSOR is specialized in customized design and solutions. Recently two types of OEM load pins have been successfully developed – oem5715 single-ended load pin and oem5719 double-ended load pin as shown in the picture below.   These OEM load pins can have customized capacity, dimensions, loading position, or/and installation method to fit specific applications. For more information, please find the standard BCM SENSOR load pins via https://www.bcmsensor.com/product-category/load-cells/load-pins/, or contact us at sales@bcmsensor.com and +32-3-238 6469. Read More...

G-series Glass-encapsulated NTC Thermistors

BCM SENSOR is proud to present G-series glass-encapsulated NTC thermistors designed to sustain high temperature up to 260°C. Thanks to the glass-encapsulation, this series is widely used as a temperature detector and sensor, temperature compensator, and circuit protection device in applications which require good resistance to high temperature. Typical applications: - Home appliances; - HVAC system; - Industrial process control; - Automotive industry; - Electric circuit protection. The G-series has the following features: - Wide operating temperature range from -40°C to +260°C; - Wide range of resistance (500Ω, Read More...

NTC Thermistors from BCM SENSOR

BCM SENSOR is proud to present a new product group, NTC thermistors, available for batch production. NTC thermistors have negative temperature coefficient of resistance - their resistance decreases exponentially with their temperature increase. Thanks to the high sensitivity, the NTC thermistors are widely used as temperature detection and measurement, temperature compensation, and circuit protection in industrial and automotive applications as well as for general purpose. The NTC thermistors from BCM SENSOR are classified into 6 series: C-series: NTC thermistor chips; Read More...

Wireless Sensor Network System from BCM SENSOR

BCM SENSOR has recently successfully developed a wireless sensor network (WSN) system. This system contains several wireless sensors and a wireless network monitor, as shown below. This system is an independent system employing 2.4GHz RF technology for communication. Its communication range can reach ~100 meters through open space. This WSN system is designed for indicating whether the monitored force, load, or pressure is within a tolerance. The current system is integrated with load pins. This technology although can be used Read More...

Sensor + Test 2017 trade fair (Nuremberg, Germany, 30 May -1 June 2017)

BCM SENSOR will participate at the Sensor + Test 2017 trade fair (Nuremberg, Germany, 30 May -1 June 2017) We would like to invite you to visit our stand in hall 1, booth nr. 104. Along with our standard products this year we will present the Wireless Sensor Network (WSN) System for the wireless tie-down strap system used on trucks to measure the force and to signal certain load situation. Please download your free entry tickets by the following hyperlink: http://www.sensor-test.de/service/sensorticket.php?Fid=50036&Spr=en We are looking Read More...

Three-way Manifold for Differential Pressure Transducers with Flange

BCM SENSOR is proud to present a new option of mechanical interface of BCM SENSOR differential pressure transducers - a three-way manifold mounted on the flange. The picture below shows one example of this new option on the model 160M. The new option can also be applied on any other BCM SENSOR differential pressure transducers or transmitters which can be equipped with the flange. The three-way manifold offers the following benefits: Onsite installation and maintenance of the transducer; Onsite zero offset Read More...