News

20th Anniversary of BCM SENSOR

On the 8th of January 2016, BCM SENSOR celebrates the 20th Anniversary as a manufacturer of a wide range of sensors, from sensing elements to complete transducers and transmitters. Established on the 8th of January 1996 in Antwerp, we started with metal foil strain gauges, semiconductor strain gauges and bondable resistors offering very good performance to price ratio and short lead-times for both standard products and customized solutions. In 1997 our product range was extended with load cells and load pins, Read More...

Miniature Submersible Liquid Level Transducers

BCM SENSOR has recently launched a newly developed liquid level transducer, model LV16, for mass production. This miniature liquid level transducer is based on piezoresistive working principle and has a very thin (Ø12mm) transducer body made from 316 stainless steel. (more…) Read More...

Flip-Chip Pressure Sensor Dies

BCM SENSOR has recently released a newly developed flip-chip pressure sensor die for mass production. This flip-chip sensor die, model SE105, is based on piezoresistive working principle and is manufactured by 6” silicon micro-machining process. Shown in the image are two cross section of the SE105 flip-chip sensor die, which can be used for gauge or absolute pressure measurement: Thanks to the unique manufacturing process, the flip-chip is realized at the SE105 pressure sensor die, resulting in the following advantages comparing Read More...

101B(a19G) Pressure Sensors Now with Digital Output

To broaden the application range of general purpose sensors 101B(a19G) BCM SENSOR has upgraded this model to the digital output of both I2C and SPI. Customized electrical interface is available on request. The 101B(a19G) has wide availability of measuring ranges, from -1~0 bar gauge pressure (0~1 bar absolute pressure) to 0~600 bar, and accuracy up to 0.25%fs. For further information, please do not hesitate to contact BCM SENSOR. Link to the datasheet: http://www.bcmsensor.com/mh_search.php?keywords=101B%28a19G%29&x=0&y=0 Read More...

Submersible Liquid Level Transducers & Transmitters with Flush Diaphragm

Recently BCM has updated Submersible Liquid Level Sensors, model LV36, to the structure with flush diaphragm. Thanks to the flush diaphragm, the LV36 can be used for liquid level measurement in the places where mud or grass, or particles are contained in the liquid, and the LV36 can be free from maintenance, which is not necessary to be cleaned during service. As the result, the LV36 with flush-diaphragm structure offers wider application than before. The updated LV36 has sturdy and Read More...

720G Pressure Transmitters for High Pressure Applications

BCM SENSOR TECHNOLOGIES has developed the 720G pressure transmitters for very high pressure applications. This model is based on our mono-block pressure sensor, 500G, which is manufactured from one piece of stainless steel, to realize highly  robust design. This model has various mechanical and electrical interfaces available to fit different requirements or working conditions. Moreover, the customized interface is also possible on request. If the 720G is interesting for your applications or you need further information, please contact us at: Tel.: +32.3.238 Read More...

Sanitary Pressure Transmitter

BCM SENSOR has launched a new version of model 132S, type (c) Sanitary Pressure Transmitter which is especially designed for food and pharmaceutical industries.   The main feature of 132S(c) is its mechanical interface: Tri-Clamp connection. The Tri-Clamp connection of 132S(c) is easily to clean and sanitized, and lets to perform excellent sealing. Between the Tri-clamp connection and the electronic housing, the integral cooling extension is integrated to enhance the thermal resistance. The operating temperature of 132S(c) can go up to 200 degree Celsius. These Read More...

Hermetically Sealed Load Pins

BCM SENSOR TECHNOLOGIES has introduced hermetically sealed load pin of either IP 67 or IP68 protection standard. The load pin has tube-like construction made from 17-4PH stainless steel. Owing to its tube-like structure, the strain gauges are bonded on the inner surface of tube and are wired to Wheatstone bridge circuitry inside the tube, which results in the load pin featured hermetic seal, providing the load pin with excellent ingress protection up to IP68. Therefore, this hermetically sealed load Read More...

Professional Support for Your Strain Gauge Applications

BCM SENSOR has 16-year experience in design, develop, and manufacture OEM strain gauges of a wide range, made from either metal foil or semiconductor material, for transducer application. For metal foil strain gauges, there are various options of pattern, resistance, backing material, and solder-pad finishing available for different applications. These gauges are both temperature-compensated, matching to different sensor body materials (identified by different S.T.C. numbers), and creep-compensated, which are specially developed for precision transducer application. For the applications requiring high output Read More...

500G Mono-block Pressure Sensors for High Pressure Applications

500G-series is specially designed pressure sensors for high pressure applications. As the 500G pressure sensor is made from one piece of 17-4PH stainless steel (mono-block structure), it possesses a rigid structure and can be used to measure pressures up to 8000bar. The glass-bonding process is employed to bond silicon strain gauges on the sensor, providing excellent stability, high reliability and low hysteresis to the 500G-series pressure sensors. The mono-block structure of the 500G-series results in trustable mechanical strength and rugged Read More...