News

Compact Design on Pressure Sensor with True Flush Diaphragm

BCM SENSOR has applied metal foil strain gauge technology on the pressure sensor to achieve the true flush diaphragm. As such the diaphragm is completely flat without any corrugated structure on the diaphragm, it is ideal for the applications which require cleaning process for viscous pressure media or media with particles. Recently a new compact design of model 132F has been unveiled as shown in the picture below. The total length is 30mm shorter than our current 132F. Key specifications of Read More...

Full-Bridge Strain Gauges with Integrated Flat Leads on One Backing

New Compact and Neat Design to Realize Your Circuit BCM SENSOR has recently succeeded to integrate the flat leads into the pattern design of the metal foil strain gauges so that the flat leads become the part of the strain gauge. Flat leads are naturally insulated with the backing and encapsulation of the strain gauge. The solder pads as electrical contacts are located at the end of the flat leads. The picture below shows one example (*) of this design on Read More...

BCM office will be closed for summer holidays

BCM office will be closed for summer holidays from 13th till 28th of August 2016. Your e-mails, inquiries and orders will be processed starting from 29th of August. BCM Team wishes you a nice Summer! Read More...

20th Anniversary of BCM SENSOR

On the 8th of January 2016, BCM SENSOR celebrates the 20th Anniversary as a manufacturer of a wide range of sensors, from sensing elements to complete transducers and transmitters. Established on the 8th of January 1996 in Antwerp, we started with metal foil strain gauges, semiconductor strain gauges and bondable resistors offering very good performance to price ratio and short lead-times for both standard products and customized solutions. In 1997 our product range was extended with load cells and load pins, Read More...

Thermal Gas Flow Sensors for Residential Smart Gas Metering

BCM SENSOR has launched a newly developed thermal gas flow sensor, model TFS2200, specially designed for the residential smart gas metering applications. This sensor works on thermal bridge working principle. Thanks to the MEME process, this sensor has advantages of low power consumption and wide measuring range with high accuracy. As a result the measuring range of TFS2200 sensor is 0.016~6 m3/h of the turn-down ratio of 350:1. The output signal of the sensor can be conditioned to either analogue Read More...

Miniature Submersible Liquid Level Transducers

BCM SENSOR has recently launched a newly developed liquid level transducer, model LV16, for mass production. This miniature liquid level transducer is based on piezoresistive working principle and has a very thin (Ø12mm) transducer body made from 316 stainless steel. (more…) Read More...

Flip-Chip Pressure Sensor Dies

BCM SENSOR has recently released a newly developed flip-chip pressure sensor die for mass production. This flip-chip sensor die, model SE105, is based on piezoresistive working principle and is manufactured by 6” silicon micro-machining process. Shown in the image are two cross section of the SE105 flip-chip sensor die, which can be used for gauge or absolute pressure measurement: Thanks to the unique manufacturing process, the flip-chip is realized at the SE105 pressure sensor die, resulting in the following advantages comparing Read More...

101B(a19G) Pressure Sensors Now with Digital Output

To broaden the application range of general purpose sensors 101B(a19G) BCM SENSOR has upgraded this model to the digital output of both I2C and SPI. Customized electrical interface is available on request. The 101B(a19G) has wide availability of measuring ranges, from -1~0 bar gauge pressure (0~1 bar absolute pressure) to 0~600 bar, and accuracy up to 0.25%fs. For further information, please do not hesitate to contact BCM SENSOR. Link to the datasheet: http://www.bcmsensor.com/mh_search.php?keywords=101B%28a19G%29&x=0&y=0 Read More...

Submersible Liquid Level Transducers & Transmitters with Flush Diaphragm

Recently BCM has updated Submersible Liquid Level Sensors, model LV36, to the structure with flush diaphragm. Thanks to the flush diaphragm, the LV36 can be used for liquid level measurement in the places where mud or grass, or particles are contained in the liquid, and the LV36 can be free from maintenance, which is not necessary to be cleaned during service. As the result, the LV36 with flush-diaphragm structure offers wider application than before. The updated LV36 has sturdy and Read More...

720G Pressure Transmitters for High Pressure Applications

BCM SENSOR TECHNOLOGIES has developed the 720G pressure transmitters for very high pressure applications. This model is based on our mono-block pressure sensor, 500G, which is manufactured from one piece of stainless steel, to realize highly  robust design. This model has various mechanical and electrical interfaces available to fit different requirements or working conditions. Moreover, the customized interface is also possible on request. If the 720G is interesting for your applications or you need further information, please contact us at: Tel.: +32.3.238 Read More...